Engineering Estimate for Building Items: August 2013

This Building Direct Engineering Estimate includs manpower, material, equipment, wastage, etc but does not include profit and overhead for the contractor.

Item	Description	Unit	Rate
	01. EXCAVATION & EARTH WORK
1	Site clearing and removing of  top 200mm thick  soil	m2	12.301
2	Bulk excavation in expansive soil to a depth not exceeding 1500 mm.	m3	43.053
3	Ditto over 1.5m but not exceeding 3.0m	m3	65.44
4	Trench excavation not exceeding 1.5m	m3	43.053
5	Compaction fill shall be every 20cm thick until it atains a minimum of 95% CBR with Selected borrowed fill .	m3	118.56
6	Disposal of excavated material and wast.	m3	28.985
	Sub Base
7	25cm thick hard core	m3	100.1
	Total to Summary Birr
	03. CONCRETE WORK
	In Situ Concrete
1	Plain blinding concrete C-5	m3	1072.8
	Reinforced sub structure concrete
	Use ordinary Portland cement
2	C-25 in isolated footing	m3	1620.8
3	C-25 in foundation column	m3	1620.8
4	C-25 in beam	m3	1620.8
5	C-20 in slab (Ground floor)	m3	1524.9
	Reinforced super structure concrete
	Use ordinary Portland cement
6	C-25 in elevation column	m3	1620.8
7	C-25 in beams	m3	1620.8
8	C-25 in suspended slab	m3	1620.8
9	C-25 in stair case & landing	m3	1620.8
	Form work
	Sub structure normal finish to:-
10	Isolated footing	m2	120.81
11	Foundation column	m2	120.81
12	Beam	m2	120.81
	Super structure normal finish to:-
13	Elevation column	m2	120.81
14	Beams	m2	120.81
15	Suspended slab	m2	120.81
16	Satire case & landing	m2	120.81
	Reinforcement steel bar sub structure
17	Diameter, 8mm	Kg	26.5
18	Diameter, 14mm	Kg	27
19	Diameter, 16mm	Kg	27
20	Diameter, 20mm	Kg	27
21	Diameter, 24mm	Kg	27
	Super Structure
22	Diameter, 8mm	Kg	26.5
23	Diameter, 10mm	Kg	27
24	Diameter, 12mm	Kg	27
25	Diameter, 14mm	Kg	27
26	Diameter, 16mm	Kg	27
27	Diameter, 20mm	Kg	27
28	Diameter, 24mm	Kg	27
29	In 8mm thick chip wood depth 10cm	m	15.619
	Total to Summary Birr
	04. MASONRY WORK
	Stone Wall
	In cement mortar
1	Concealed from view	m3	653.2
2	Exposed face for further finish (Roughly dressed stone wall)	m3	738.2
	Concrete block works
	Class “B” in cement mortar above grade walls
3	20cm thick both faces for plaster	m2	154.25
4	15cm thick both faces for plaster	m2	133.79
	Total to Summary Birr
	05. ROOFING
	Galvanized steel sheet & accessories
1	CIS G-28	m2	229.41
2	0.4mm thick, girth 65cm	m	168.7
3	G-28 Flat steel sheet copping	m	168.7
	Total To Summary Birr
	06. CARPENTRY & JOINERY
	Eucalyptus Truss
1	Diameter, 10cm	m	34.412
2	Diameter, 8cm	m	28.376
	Zigba Purlin
3	Size 5 x 7cm	m	50.878
	Soffit nailed to supports Chipwood ceiling
4	Acoustic ceiling	m2	380
5	0.4mm thick Ribbed steel sheet (Check your detail drawing)	m2	269.97
	Fascia board
6	2.5 x 20cm Sawn Eucalyptus	m	82.218
	Band iron
7	6mm diameter, L = 1m	pcs	10
	Joinery
	Flush wooden doors hard pine frame & Mahog ply wood 4mm thick play wood 1.5mm thick black steel frame & rubber silencer Door locks shall be of mortice type standard double cylinder type comply with ASTM or EN quality standard Price includes all accessories locks, hinges etc… all complete work according to detail drawings
	Door
8	Type D1 size 100 x 100cm	No	1765.6
	Total to Summary Birr
	10. ALMUNIUM WORK
	Almunium framed windows & window doors.
	_ Thickness of aluminium profiles should be 2mm thick and plate should be 3mm thick
	Window
	Price includes 5mm thick clear glass
1	Type W size 100 x 100cm	No	2012.5
	Almunium Stair case hand rail & baluster
	Complete all according to drawing	m2	2415
	Total To Summary Birr
	07. FINISHING
	07.1 PLASTERING & POINTING
	Two coats of plater
	In cement mortar to internal surface of:-
1	Hollow concrete block work	m2	83.311
2	Concrete vertical surface	m2	83.311
3	Concrete soffit	m2	99.973
	In cement mortar to external surface of
4	Hollow concrete block wall	m2	124.97
5	Concrete vertical surface	m2	124.97
	Final coat cement plaster to:-
6	Internal plastered vertical surface	m2	28.257
7	External plastered vertical surface	m2	28.257
8	Plastered soffit	m2	28.257
	Cement pointing
9	To dressed stone wall surface	m2	54.601
	Total To Summary Birr
	07.2 FLOOR & WALL FINISH
	Cement Screed floor finish & skirting
1	35mm thick cement screed smooth finish under PVC tile	m2	62.262
	PVC floor tile and skirting
2	Size 10 cm h skirting	m	27.217
	Shall be in compliance with quality standard
3	2mm thick	m2	229.73
4	Size 10 x 2cm skirting	m	27.217
	Marble tile flooring and landing & skirting
5	2cm thick	m2	1125
6	Size 10 cm h skirting	m	140
	Non slippery Ceramic floor tile
7	10mm thick	m2	284
8	Size 10cm h ceramic skirting	m	142
	Ceramic wall tile
9	6mm thick	m2	305
	Cill and theshold
	Shpaed and throated Marblw window cill and door threshold
10	Size 3x29cm	m	310
	Steps
	Thread
11	3cm thick marble white	m2	1350
	Riser
12	2cm thick marble white	m2	1125
	Pavement
13	8cm thick cast in stie concrete in C-15 beded on 10cm thick red ash and 300mm selected material fill.
	All complete work according to detail drawing	m2	199
14	C-25 precast concrete curb	m	216.44
	Total To Summary Birr
	12. PAINTING
	Plastic Emulsion Paint to:-
1	Internal plastered vertical surface	m2	18.272
2	External plastered vertical surface	m2	18.272
3	Plastered Soffit surface	m2	18.272
4	In acuastic ceiling	m2	27.408
5	Quartz paint to external wall	m2	68.225
	Total To Summary Birr
	14.1 SANITARY INSTALLATION
	HAND WASH BASIN
1	Supply and fix Hand Wash Basin, made of white ; Size; 360mm x 395mm x 550mm. The waste fittings, connecting pieces, fixing and supporting element and other accessories	No	1800
	SOAP HOLDER
2	Supply and fix approved quality soap holder. (150x150mm)	No	258
	CRYSTAL GLASS MIRROR
3	Supply and fix approved quality framed crystal glass mirror, back-silvered, minimum 4mm thick size 2000mm x 400mm. Complete with theft resistant concealed wall fastening fittings and other accessories. (for hand wash basins)	No	1160
	WATER CLOSET
6	Supply and fix water closet, of wash down action, floor mounted, bottom outlet (floor drainage),. The waste fittings, connecting pieces, fixing and supporting element and other accessories which complete the set shall comply with the relevant clauses of BS standards
	Size 700mm x 470mm x 760mm	No	5500
	KITCHEN SINK
7	Supply and fix stainless steel Sink, double bowel, complete with trap, drain connection, drainage and over flow, heavy duty mixing faucet, plug and all other necessary faucet, plug, chain etc. and all other necessary accessories
	Size 1200 x 600 x 120mm	No	1650
	LITRE WATER HEATER
8	Supply and fix approved quaity electric water heater. Complete with all necessaries. Capacity 50 liter	No	3500
	FIRE EXTINGUISHER
9	Supply and fix 6kg Dry Powder fire extinguisher for ABCE class of fire. Complete with approved standard hanging and fixing materials.	No	1000
	FLOOR DRAIN
10	Supply and fix Ø100mm enamelled cast iron floor drain ; and all the necessary accessories	No	75
	PPR-PIPES
11	Supply, lay and connect outer diameter 20mm PLYPROPYLENE RANDOM CO-POLYMER (PP-R TYPE3) pressure pipes, (PN16), for cold water supply system.		37.5
12	Ditto Item above, but 25mm	ml	56.25
13	Ditto Item above, but 32mm	ml	63
15	Ditto Item above, but 20mm and with UV stablizing cover for the exposed pipes on the roof and for pipes from ground to roof water tank
	GS-PIPES
16	Supply, lay and connect outer diameter 50mm Galvanized steel pipe for over flow and drain pipe to be connected and washed down to the ground level	ml	133.33
	ANGLE VALVE
17	Supply and fix chrome plated service (angle) valves, of approved standard, before sink, shower and other fixtures complete with unions, elastic water proofing, hand wheels of normal quality and with all other necessary accessories.
	Diamter 1/2″ (20mm OD)	No	80
	BRONZE GATE VALVE
18	Supply and fix bronze gate valves (PN 16)diameter 1″ (25mm), of approved standards, on internal branch water pipes, pipe inlet to buildings at where shown on the drawing complete with all the necessary accessories.	No	180
19	Ditto Item No. 18 but diameter 1 1/4″ (32mm)	No	450
	Upvc FOUL PIPE
20	Supply and lay 50mm (2″) diamter uPVC pipes minimum wall thickness 2.0mm for foul water collection and vent system.
	The pipe shall be supported with galvainzed clips screwed to slab, beam columns…  Unit price shall include all the necessary assistance to the installation works there to	ml	75
21	Ditto Item No. 20, but 80mm diameter, minimum wall thickness 3.0mm	ml	127.5
22	Ditto item No. 20 but 110mm diamter, minimum wall thickness 3.2mm	ml	178.5
	UNDER SLAB CLEAN OUTS
23	Supply and fix approved quality uPVC screw type under slab clean out as shown on the detail draing. Price shall include sealing gasket on the waste water drainage line with all the necessary connecting pieces
	Diamter 50mm	No	450
	Diameter 80mm	No	765
	Diamter 110mm	No	1071
	VENT CAPS
24	Supply and install vent caps made of rigid uPVC to be connected to the roof terminal of vent pipe diameter 110mm, with min. wall thickness of	No	1071
25	Ditto Item No. 19, but 80mm diamter, minimum wall thickness 3.0mm	No	765
	uPVC DOWN PIPES
26	Supply and fix diamter 110mm uPVC Downpipes, min. wall thickness 3.2mm, with mass concrete support at ground level & complete with UV relfective oil painting, basket strainer at inlet, galvanized clips at every 1.0meters interval and all accessories.	ml	178.5
	FIBER GLASS WATER TANK
28	Supply, mount and properly place fiber glass water tank on roof top where shown on roof plan, complete with all the necessary accessories and connections such as inlet pipes, outlet pipes, drain pipes, over flow pipes all with gate valves, vent pipes with mesh cover, 80mm uPVC vent caps, manhole, etc, the manhole shall have a strong, lockable and easily openable cover just above the inlet pipe. the tank shall have:-
	_ Smooth whtie reflective finish both  internal and external surfaces
	Diamter 50mm over flow pipe
	Size 5m3	No	10000
	Items incorporated in installation of water tanks	No	500
	Diamter 50mm bronze gate valve for inlet	No	810
	Diameter 40mm bronze gate valve for outlet	No	827.82
	Diameter 50mm approved quality pvc float valve	No	150
	Diamter 50mm bronze gate valve for wash out	No	810
	Diamter 80mm uPVC vent pipe 300mm length with vent cap	No	500
	Total to Summary Birr
	15. ELECTRICAL SITE WORK
1	Surface Mounted Metalic Distribution Board MDB with earthi bas bars	No	433.33
	1pc MCCB of 100 A/3ph	No	1054.2
	1pc ACB of 80 A/3ph	No	958.33
	1pc ACB of 40 A/3ph	No	500
	1pc ACB of 32 A/3ph	No	191.67
	1pc ACB of 20 A/3ph	No	350
	1pc ACB of 16 A/3ph	No	350
	1pc ACB of 16 A/1ph	No	66.667
	1pc ACB of 10 A/1ph	No	66.667
	Ligh Points
	Switches with detachable frames 10A for flush mounting
2	Single Pole	No	140
3	Two gang Dobule pole	No	180
4	Dobule Pole	No	160
5	Two way	No	160
6	Triple pole	No	200
7	Intermediate	No	210
	Socket Out lets
	16A for flush mounting
8	Socket 2p+e outlet in thermoplastic conduit of diameter 16mm fed by PVC conductor of 3×2.5sqmm	No	160
9	Ditto but twin outlet	No	160
10	Ditto but for water heater	No	160
11	Ditto but for twin outlet in side floor box	No	160
12	Ditto but for enjera stove in thermoplastic conduit of dia. 21mm fed through PVC sheated cable of 3x6sq.mm	No	450
13	Ditto but for stove 20A, 1ph fed by pvc sheated cable of 3x4sq.mm in thermoplastic conduit dia. 21mm	No	550
14	Power to coffed m/c fed by PVC sheated cable of 3x6sq.mm in thermoplastic conduit of dia. 21mm	No	333.5
15	3p+E+N Power out let fed by PVC sheated cable of 5x4sq.mm in pvc conduit of dia. 29mm	No	433.55
	Extra Over Socket out lets with corresponding box 16A for lush mounting with detachable frames and Shutter All contract points (phase, neutral and earthing) must be copper
16	16A, 1ph	No	150
17	16A, 1ph twin outlet	No	200
18	16A, 1ph water heater	No	150
19	20A, 1ph with on/off switch	No	580
20	25A, 1ph with on/off switch	No	760
21	25A, 3ph with on/off switch	No	980
	Type of Ligh Fittings
22	Supply and install the light fittings with under mentioned specification
	Mounting-ceiling surface
	Lamp type- fluorescent
	Number of Lamps – 2
	Lamp wattage – 36watts
	Luminare material-Steel
	Ingress protection-20
	Size-length 1530mm, width 293mm and 106mm height
	Control gear-electronic
	Optic Type-double parabolic Louver	No	2000
	TV SYSTEM
23	TV point for recessed installation fed through coaxial cable in PP dia. 29mm conduit with the necessary accessories	No	1500
24	TV Terminal box	No
25	Dia. 29mm for TV antenna entry	ml	155
26	TV Socket outlet	No	200
	Data/Tele system Horizontal cabling
27	Twin RJ 45 8 contact Tele/data socket outlet point and the necessary accessories to make the system complete.	No	1200
	Extra Over data/tele outlet
28	Twin RJ 45 data/tele outlet	No	480
29	Single RJ 45 datta/telet outlet	No	480